manualshive.com logo in svg

TRENDnet TEG-S2400I - DATA SHEETS, User Manual, Page: 78 / 149

Share
Download
TRENDnet TEG-S2400I - DATA SHEETS User Manual Download Page 78

- 78 - 

‹

 

Create 802.1Q VLAN 

   

  Create an 802.1Q VLAN and add tagged /untagged member ports to it.   

1.

 

Select 

<Edit>

.  

2.

 

VLAN Name: 

Type a name for the new VLAN.   

3.

 

VLAN ID: 

Type a VID (between 1~4094). The default is 1. There are 256 VLAN groups to 

provided configure.   

4.

 

Protocol VLAN: 

Press 

Space 

key to choose protocols type.   

5.

 

Member: 

Press 

Space 

key to choose VLAN member. There are three types to selected:   

a.

 

UnTagged

：

This port is the member port of this VLAN group and outgoing frames are NO 

VLAN-Tagged frames.   

b.

 

Tagged

：

This port is the member port of this VLAN group and outgoing frames are 

VLAN-Tagged frames.   

c.

 

NO

：

The port is NOT member of this VLAN group.   

6.

 

Press 

Ctrl+A 

go back action menu line.   

7.

 

Select 

<Save> 

to save all configure value.   

 

 

NOTE: 

If the trunk groups exist, you can see it (ex: TRK1, TRK2…) after port 26, and you can 

configure it is the member of the VLAN or not.   

 

 

Summary of Contents for TEG-S2400I - DATA SHEETS






















































































































































Reviews:

No comments