29
port and then hit [Space Bar] to select “V” to add the port to the
VLAN group or select “-” to delete the port from the group. By
default, all ports belong to VLAN 1. The default setting of VLAN
is shown as Figure 10.
Figure 10. VLAN Configuration
For example, there are five computers (PC1~PC5) connected to
the Switch’s port 1~5. They had been divided into two VLAN
groups: VLAN1 (PC1~PC4) and VLAN2 (PC2~PC5). There is
no way to connect PC1 and PC5 shown as Figure 11. If PC1 has
to connect to PC5, it should joint PC1 and PC5 in the same
VLAN.