16
These ports auto negotiate between 10/100/1000Mbps and
support auto-MDIX type detection function. These two ports
operate only in full duplex mode.
Console Port
An RS-232 DCE console port is set up and manages the Switch
via a connection to a console terminal or PC using a terminal
emulation program.
Rear Panel
Power Connector
Power Switch
Figure 5. The rear panel of the Switch
AC Power Connector
This is a three-pronged connector that supports the power cord.
Plug in the female connector of the provided power cord into this
connector, and the male into a power outlet. Supported input
voltages range from 100~240V AC at 50~60Hz.
Power Switch
Use the power switch beside this power connector to turn on or
turn off the power of the Switch.