Stackable NWay Ethernet Switch User’s Guide
14
Identifyi ng External Components
TEG-S224M
TEG-S224S
Figure 3-2. Rear panel view of the Switches
? ?
The optional Gigabit Ethernet slide-in module is an
uplink/MDI-
II
(media dependent interface) port for uplink to
another Switch (TEG-S224M and TEG-S224MF only). Two
models are available, one-port and two-port.
? ?
The Stacking input/output port slide-in module in the rear
panel is for stacking to another device to implement a high-
port count, manageable Switch. The three-port module is for a
master device and a one-port module is for a client device.
? ?
The AC power connector is a three-pronged connector that
supports the power cord. Plug in the female connector of the
provided power cord into this connector, and the male into a
power outlet. Supported input voltages range from 100 ~ 240
VAC at 50 ~ 60 Hz.
Side Panels
The right side panel of the Switch contains two system fans (see the
bottom part of the diagram below). The left side panel contains heat
vents.
Summary of Contents for TEG-S224 Series
Page 14: ......