Stackable NWay Ethernet Switch User’s Guide
10
Unpacking and Setup
Then, use the screws provided with the equipment rack to mount the
Switch in the rack.
Figure 2-2B. Installing the Switch in an equipment rack
Power on
The Switch can be used with AC power sources 100 - 240 VAC, 50 -
60 Hz. The power switch is located at the rear of the unit adjacent to
the AC power connector and the system fan. The Switch’s power
supply will adjust to the local power source automatically and may be
turned on without having any or all LAN segment cables connected.
After the power switch is turned on, the LED indicators should
respond as follows:
Summary of Contents for TEG-S224 Series
Page 14: ......