Stackable NWay Ethernet Switch User’s Guide
118
Using the Console Interface
Figure 6-51. Restart System screen
Factory Reset
Before performing a
Factory Reset
, be absolutely certain that this
is what you want to do. Once the reset is done, all of the Switch’s
settings stored in NV-RAM (including TCP/IP parameters, SNMP
parameters, the enabled/disabled settings of ports, security settings,
etc.) will be erased and restored to values present when the Switch
was purchased.
Note:
After performing the
Factory Reset
, make sure to redefine
the IP settings for the Switch in the
Configure IP Address
menu. Then perform a
Restart System
on the Switch. After
these three procedures are performed, your
Factory Reset
is
complete.
Choose
Factory Reset
from the main menu. The following
screen appears:
Summary of Contents for TEG-S224 Series
Page 14: ......