TRENDnet TE100-S24V, User Manual, Page: 30 / 34

24
Figure 18. File installation
Upload Configuration: Select this for saving the current
configuration to a file at a desired location (e.g. floppy disk or
hard drive).
Move cursor to “Upload Configuration” and hit “Enter”.
At “Are you sure?”, hit “space bar” once to show “Yes”
and then hit “Enter”.
On Hyper Terminal’s Menu Bar, click on “Transfer” and
select “Receive File…”.
Input the path where you would like to save the file to (or
click on “Browse” to select the location), click on the drop
down arrow and select “Xmodem” as transfer protocol,
click on “Receive”, enter the desired file name, and then
click “OK”.
After saving the file, the cursor will move to “Exit”, hit
“Enter” to go back to “File” menu.