TRENDnet TE100-S24V, User Manual, Page: 25 / 34

19
Figure 13. Port Configuration
(1) Speed
There are five speed modes— Auto , 100M Full , 100M Half ,
10M Full , and 10M Half . To change the speed setting, highlight
Port, enter the port number and hit Enter , and the cursor will
move to the next field Speed . Hit Space Bar to select one of the
speed options. Hit Enter to select the desired speed and the
cursor will move to Flow Control option.
(2) Flow Control
This setting determines whether or not the Switch will be
handling flow control. To change the flow control setting, select
the Port number, highlight the
FlowCtrl field, and hit Space Bar
to select ON or OFF . Set FlowCtrl to ON to avoid data transfer
overflow.
(3) QoS
Quality of Service (QoS) is a networking term that specifies a
guaranteed throughput level. When data packets with QoS
priority information pass through QoS supported device, these
packets will be handled with priority. Without certain level of
QoS, multimedia applications such as Streaming Video and
Network Conference can be sluggish or stopped due to network
congestions.
This Switch supports IEEE 802.1p QoS Tagging and Port-Based
QoS. It exams each packet for IEEE 802.1p priority tag, if the tag
value is higher than 3, the packet has high priority; otherwise, the
packet has low priority. If the packet has no priority tag, it will