TRENDnet TE100-S24V, User Manual, Page: 16 / 34

10
AC Power
The Switch requires AC power supply of 100~240V AC, 50~60
Hz. The Switch does not come with a Power ON/OFF switch, so
the Switch will automatically power on when it is connected to
an electrical outlet. The switch’s power supply will adjust to the
local power source automatically and may be turned on without
having any LAN segment cables connected.
I
DENTIFYING
E
XTERNAL
C
OMPONENTS
This chapter describes the front panel, rear panel, and LED
indicators of the Switch.
Front Panel
The figure below shows the front panels of the Switch.
Figure 3. Front panel of the 24-port 10/100Mbps Fast Ethernet Switch
LED Indicator
Comprehensive LED indicators display the status of the switch
and the network (see the
LED Indicators chapter below).
10/100BASE-T Twisted-Pair Ports