TRENDnet TE100-S16R, User Manual

Page: 18 / 28

10
Switches via both trunking groups with 800Mbps bandwidth between
the Switches. Please see the table and diagrams below for more
information.
You can select to trunk two Switches using 2, 3, or 4 ports with Trunk
Group A or B. Please follow the instructions below to set the trunking
dipswitches:
Note: You can only trunk same model Switches together.
1. Power off the Switch.
2. Follow the table above to select the trunk ports and set the
dipswitches.
3. Repeat step 1 & 2 and configure another Switch.
4. Connect the trunk ports together using crossover CAT5 UTP/STP
cables.
5. Power on the Switches.
Please refer below for some trunking examples:
A0 A1 Trunking Group A
0 0 Disable
1 0 Port 1 & 9 (400Mbps)
0 1 Port 1, 2 & 9 (600Mbps)
1 1 Port 1, 2, 9 & 10 (800Mbps)
B0 B1 Trunking Group B
0 0 Disable
1 0 Port 8, 16 (400Mbps)
0 1 Port 8, 15 & 16 (600Mbps)
1 1 Port 7, 8, 15 & 16 (800Mbps)