TRENDnet TE100-S1616V, Installation Instructions Manual, Page: 35 / 55

User’s Guide 35
Port Setting
When connecting the Switch to legacy networking equipments, it
may be necessary to disable auto-negotiation and flow control. This
can be done by selecting “M” at the terminal mode main menu and
then select the desire port speed, duplex mode, and flow control on
/off.
Auto-Negotiation
Every TX ports on the switch is capable of auto-negotiate
10/100Mbps and full or half– duplex. However, at times it might
need to disable this function in order to accommodate operations
involving legacy equipment. The duplex and speed can be altered
by enter [M] on the configuration manual. Please see next page for
detailed information.
Flow-Control
This flow control mechanism is set up between the two stations on
the point-to-point link. If the receiving station at the end becomes
congested, it can send back a frame called a "pause frame" to the
source at the opposite end of the connection that instructs that