TRENDnet TE100-S1616V, Installation Instructions Manual, Page: 15 / 55

User’s Guide 15
?
Power
This LED comes on when the switch is connected to a power
supply and turned on.
?
Reset Button
If the switch should become unre sponsive, you may perform a reset
of the switch by pressing this button.
?
Port Status
The front panel of the switch has two segments of eight ports
numbered from 1X to 16X on TE100 -S1616V or three segments of
eight ports numbered from 1X to 24X on TE100 -S2424V. The
LEDs are located at the left side of each segment, display status for
each respective port. Consult the following chart for clarification.
Table 1: Port Status
LED
State Indication
Steady
LINK: The port has established a
valid network connection
LNK/ACT
Flashing
ACTIVITY: The port is
transmitting or receiving data
100 Steady
100Mbps: The port has
established a valid 100Mbps
network connection