TRENDnet TE100-S1616V, Installation Instructions Manual, Page: 18 / 55

18 User’s Guide
Installation
This chapter presents step -by-step installation instructions for
TE100-S1616V/TE100-S2424V.
Selecting a Site for the Switch
As with any electronic device, you should place the switch where it
will not be subjected to extreme temperatures, humidity, or
electromagnetic interference. The site you select should meet the
following requirements:
The room temperature should be between 32 and 104 degrees
Fahrenheit (0 to 40 degrees Celsius).
The relative humidity should be less than 90 percent,
non-condensing.
Surrounding electrical devices should not exceed the
electromagnetic field (RFC) standards for IEC 801-3, Level 2
(3V/M) field strength.
Make sure that the switch receives adequate ventilation. Do not
block the ventilation holes on the side of the switch or the fan
exhaust port on the rear of the switch.
The power outlet should be within 1.8Meter of the switch.
Detailed specifications may be found on page 46.