2
XCITE/BBC Installation Instructions TG200686 Issue 2 , 05-Jun-2014
XCITE/BBC
Installation Instructions - Mounting
Please send any comments about this or any other Trend technical publication to [email protected]
© 2014
Honeywell Technologies Sàrl, ECC Division. All rights reserved. Manufactured for and on behalf of the Environmental and Combustion Controls
Division of Honeywell Technologies Sàrl, Z.A. La Pièce, 16, 1180 Rolle, Switzerland by its Authorized Representative, Trend Control Systems Limited.
Trend Control Systems Limited reserves the right to revise this publication from time to time and make changes to the content hereof without obligation
to notify any person of such revisions or changes.
Trend Control Systems Limited
Albery House, Springfield Road, Horsham, West Sussex, RH12 2PQ, UK. Tel:+44 (0)1403 211888 Fax:+44 (0)1403 241608 www.trendcontrols.com
Trend Control Systems USA
6670 185th Avenue NE, Redmond, Washington 98052, USA. Tel:(425) 869-3900 Fax:(425) 869-8445 www.trend-americas.com
5
Plug in Battery Board
6
Insert Battery
7
Replace Auxillary Board Cover
8
Close Panel
9
Reconnect Supply to I/O
10
Switch On
3 INSTALLATION
(continued)
4 DISPOSAL
WEEE Directive:
At the end of their useful life the packaging and
product should be disposed of by a suitable
recycling centre.
Do not dispose of with normal household waste.
Do not burn.
also reconnect any I/O modules
Warning:
The lithium battery must not be
recharged, disassembled, burnt or short
circuited. Misuse may cause explosion or
fire. Dispose of carefully. Refer to Health and
Safety Executive Guidance Note GS43 - see
section 4, Disposal, below.
CR 2032
CR 2032
apply plate
apply board to plate
press board home
plate supplied with XCITE/BBC
CR2032 3V supplied with XCITE/BBC
