background image

TB/TI Thermistor Insertion Temperature Sensor Installation Instructions TG200727 Issue 5, 07-Mar-2016.

TB/TI 

Installation Instructions

Please  send  any  comments  about  this  or  any  other  Trend  technical 

publication to [email protected]

© 2016

 Honeywell Technologies Sàrl, ECC Division. All rights reserved. Manufactured for and on behalf of the Environmental and Combustion Controls 

Division of Honeywell Technologies Sàrl, Z.A. La Pièce, 16, 1180 Rolle, Switzerland by its Authorized Representative, Trend Control Systems Limited.

Trend Control Systems Limited reserves the right to revise this publication from time to time and make changes to the content hereof without obligation 

to notify any person of such revisions or changes.

Trend Control Systems limited

Albery House, Springfield Road, Horsham, West Sussex, RH12 2PQ, UK. Tel:+44 (0)1403 211888 Fax:+44 (0)1403 241608 www.trendcontrols.com

 

TR CU 

Certification

4 DISPoSal

Weee Directive:

At  the  end  of  their  useful  life  the  packaging  and 

product  should  be  disposed  of  by  a  suitable 

recycling centre.

Do not dispose of with normal household waste.

Do not burn.

Summary of Contents for Thermistor TBTI









Reviews: