TB/TI Thermistor Insertion Temperature Sensor Installation Instructions TG200727 Issue 5, 07-Mar-2016. 5
Installation Instructions TB/TI
5
Remove lid
7
Wire to Controller
8
Replace lid
6
Insert Cable
2 InSTallaTIon
(continued)
Either:
use M20x1.5 cable gland (supplied)
Or:
use M20 fl exible conduit (not supplied)
Recommended cable: TP/1/1/22/HP/200-600V (Belden 8761)
Terminal size:
0.5 to 2.5 mm
2
(20 to 14 AWG)
Sensor
IQ controller
COM (0V)
IN
polarity
independent
Analogue input
channel confi gured
for thermistor (T)
terminate screen at IQ end only
Note: IP67 (NEMA6) rating is only achieved if
the sensor is correctly installed with the lid and
cable or conduit connection fully tightened.
