TB/TI Thermistor Insertion Temperature Sensor Installation Instructions TG200727 Issue 5, 07-Mar-2016. 1
Installation Instructions
TB/TI
Thermistor Insertion Temperature Sensor
Important: Retain these instructions
These instructions shall be used by trained service
personnel only.
If the equipment is used in a manner not
specified by these instructions, the protection provided by the
equipment may be impaired.
https://partners.trendcontrols.com
1
Dimensions
2 InSTallaTIon
1
Box ConTenTS
TB/TI Thermistor Insertion
Temperature Sensor Installation
Instructions (TG200727)
6 m
m (
0.
24
”)
400 mm (15.75”)
94 m
m (
3.
70
”)
57 mm (2.24”)
11
3 m
m (
4.
45
”)
50 m
m
(1
.9
7”
)
6 mm compression
fitting
3 x 4 mm diam. holes
on a 30 mm (1.18”) PCD
(Pitch Circle Diameter)
Mounting flange for use as duct sensor (ACC/DF)
clip
brass brush
hexagonal
socket 2 mm
grub screw
Universal Fitting Kit for immersion sensor
use in existing pockets (ACC/UF)
spring
Pockets for use as immersion sensor: Brass (WB150 or WB50); Stainless Steel (WS150 or WS50)
135 mm (5.31”)
14 mm
(0.53”)
24 mm
(0.95”)
Ø8 mm
(0.31”)
143 mm (5.63”)
Ø6.5 mm (0.25”)
G½” (BSPP)
ConTenTS
1
Box Contents .................................................................1
2 Installation .....................................................................1
3
Cleaning and Maintenance
...........................................7
4 Disposal .........................................................................8
150 mm (5.91”)
70 mm (2.76”)
50 mm (1.97”)
58 mm (2.28”)
WB150, WS150
WB50, WS50
TB/TI/ES
TB/TI/S
TB/TI/L
