EN - T18S/AG115
-16-
Storage Recommendations
The best storage place is one that is cool and dry
away from direct sunlight and excess heat or cold. For
optimum battery performance and life, store battery
packs at room temperature when not in use.
For long storage, it is recommended to store a fully
charged battery pack in a cool, dry place out of the
charger for optimal results.
NOTE:
Battery packs should not be stored completely
depleted of charge. The battery pack will need to be
recharged before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the
labels on the charger and the battery pack may show the
following pictographs: -
Read instruction manual before use.
See Technical Data for charging time.
Battery charging.
Battery charged.
Battery defective.
Delay charge (Battery cooling or too cold battery).
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4ºC and 40ºC.
Only for indoor use.
Discard the battery pack with due care for the
environment.
Do not incinerate the battery pack.
ITEMS ENCLOSED
1 x Angle grinder
1 x Blade changing spanner
1 x Handle
1 x Instruction manual
1x Quick release flange
1 x Cutting guard
1 x Grinding guard
NOTE:
Battery packs, chargers and kit boxes are not
included with B models.
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand this
manual prior to operation.
MARKINGS ON TOOL
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Date Code Position
The year of manufacture is on the rating plate.
DESCRIPTION OF PARTS - (Fig. 1)
A.
Hand grip
B.
Battery port
C.
Spanner and spanner storage point
D.
Handle
E.
Guard
F.
Backing washer
G
. Disc clamping nut
H.
Guard clamp lever
I.
On / Off trigger with safety latch
J.
Spindle lock
K.
Air vent
L.
Quick release flange
M.
Cutting guard
INTENDED USE
This angle grinder has been designed for cutting,
grinding of metal , sanding and wire brush applications.
DO NOT
use grinding wheels other than centre
depressed wheels and flap discs.
DO NOT
use under wet conditions or in the presence of
flammable liquids or gases.
DO NOT
let children come into contact with the tool.
Supervision is required when inexperienced operators
use this tool.
• Young children and the infirm.
This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons
(including children) suffering from diminished physical,
sensory or mental abilities; lack of experience,
knowledge or skills unless they are supervised by a
