T50
-6-
Important Information for
Recharging Hot Batteries
When using your cordless impact driver
continuously, the batteries in your battery pack
will become hot. You should let a hot battery
pack cool down for approximately 30 minutes
before attempting to recharge. When the battery
pack becomes discharged and is hot, the red
light on the charger will flash. When the battery
pack cools down, the red light will glow
continuously to indicate fast charging mode,
1-hour charge time.
NOTE:
This will occur when continuous use of
your tool causes the battery pack to become hot.
It does not occur under normal conditions.
Additional Safety Rules
for Impact Drivers
■
Always hold tool by insulated gripping
surfaces. Contact with a ‘live’ wire will make
exposed metal parts of the tool ‘live’ and can
cause an electric shock.
■
Be aware that this tool is always in an
operating condition, because it does not have
to be plugged into an electrical outlet. Always
set the forward/reverse lever to the locked
OFF position when installing or removing the
battery pack.
MANU-T50 v1.0 6/11/06 2:14 pm Page 6
