PH/JIG/M
-13-
ACCESSORIES
Self Tapping Screws Square Drive
Standard Thread No.7x30mm.
Pack 500
Ref. PH/7X30/500
Self Tapping Coarse Thread
Screws Square Drive
Coarse Thread No.7x30mm.
For softer woods, plywood and
particle board
Pack 500
Ref. PH/7X30/500C
Quick Release Shank Drill Bit
Ref. PH/DRILL/95Q
MAINTENANCE
The accessory has been designed to operate
over a long period of time with minimum of
maintenance. Continual satisfactory operation
depends upon proper tool care and regular
cleaning.
Cleaning
n
Keep the threads and clamp mechanism clear
of sawdust and resin build-up.
n
Regularly clean with a soft cloth.
Lubrication
n
Periodically lubricate the holes in the guide
columns with PTFE dry lubricant.
Drill Bit Care
n
Ensure the drill bit is sharp.
n
Check tightness of depth collar set screw.
Storage
n
After use store jig in its packaging or in a
cupboard.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as waste.
Packaging should be sorted for environmental-
friendly recycling.
The product and its accessories at the end of its
life should be sorted for environmental-friendly
recycling.
GUARANTEE
All Trend products are guaranteed against
any defects in either workmanship or material,
except products that have been damaged due to
improper user or maintenance.
Pocket Hole Plug Cutter
Face Clamp
Ref. PH/CLAMP/F6
A tool steel pellet cutter that is used in a
pillar drill to allow plugs to be made to cover
the pocket hole.
Allows plugs up to 52mm long to be created
in end grain.
Ref. PH/PC/95
Please use only Trend original accessories.
Please use only Trend original spare parts and
accessories.
No.2 Square Drive Bit 75mm
Ref. SNAP/SQ/2A
