PH/JIG/M
-10-
APPLICATIONS
Frame Corner Joints
– faster and stronger than
dowel and biscuits. Self clamping whilst glue is
drying.
Mitred Frame Corner Joints
– for narrow
frames a single pocket hole is necessary. Cut
the mitre and rout any rebates before boring
the pocket holes. For material less than 50mm
wide it may be necessary to tilt the pocket hole
piece so that the hole is not perpendicular to the
mitred edge.
Square Corner Joints
– faster and stronger
than dowel and biscuits. Self clamping whilst
glue is drying.
T- Joints
– faster and stronger than dowel and
biscuits. Self clamping whilst glue is drying.
When changing material or joint
application, test the depth of the drill
and collar before drilling into the
workpiece. Test drill in waste
pieces of the same thickness. Then
drill a screw into the pocket joint only
and lay it against the jointing piece to
see if screw depth is correct.
