IQVIEW8 Installation Instructions TG201232 Issue 9, 30-May-2017. Applies to v1.30. 5
Installation Instructions IQVIEW8
5
Mount Enclosure
4
Prepare Mounting Holes
(for flat
surface, and UK/US double pattress mounting)
(continued)
6
Route Cables
7
Wire Connectors
8
Connect Cables
3.2 Installation - On a Wall
(continued)
Insert top 2 screws
3 mm (0.12”)
Either:
UK Double Pattress Box
Or: US Double Pattress Box
Then:
(for flat surface and UK/US double pattress box)
Either:
Using Drill outs
If routing cables through the drill outs run the cables to into the
enclosure using 20 mm gable glands (not supplied).
Or:
into rear of enclosure
If routing cables from a pattress box run the cable to the
pattress box as required, and then into the rear of the
enclosure.
Follow ‘Installation - Wiring’
on page 9
Follow ‘Installation - Connect Cables’
on page 11
