Select alarm input channel for apply record setting. Select [ALL] for apply to all channels.
5.6.2 Alarm Input Type
The alarm input attribution includes N/O. and N/C.
Each camera has one input pin on Terminal Block at the real panel.
User must use voltage output type sensor to connect alarm input interface.
Sensor device output
POSITIVE (+)
pin connect to DVR’s input pin (1~4, or 1 ~ 8, 9~16 pin)
Sensor device output
GROUND (
－
)
pin connect to DVR’s G pin
Please refer to following terminal block schema(8CH as left, 16CH as right)
N/O.: Normally open
. Sensor must constant output low level voltage. If output voltage change
from Low level to High level then DVR will be triggered.
N/C.: Normally connected
. Sensor must constant output High level voltage. If output voltage
change from High level to Low level then DVR will be triggered.
5.6.3 Event Handling
The alarm triggered event handling include: record/alarm output/PTZ preset /Buzzer sound
output/Upload alarm to CMS..
Note1: if user wants to set alarm triggered record, please set the record schedule first at “Record Schedule”.
45
Maximum high level voltage is 5V
DC
Summary of Contents for Dual Streaming H.264 Multiplex 8CH/16CH Network DVR
Page 7: ...7...
Page 57: ...State HDD capacity Channel and Network status 57...
