
Combi 1001
-10-
Female Joint
■
Leave the two location bushes in holes
marked Green dot. (The Green dots must be
uppermost). Leave the length stop bush in
position.
■
Place the template onto the worktop to be cut,
ensuring the location bushes are touching the
worktop. Now cramp securely in position
using two quick action clamps or the
accessory clamps ensuring they will not foul
the router path.
■
Set cutter depth.
■
Plunge router and cut joint in a series of
passes, feeding left to right.
IMPORTANT!
When cutting a joint, hold the
router guide bush hard against
the template and cut from left
to right. It is recommended that
the depth stops of the router
are used to set the depths of
cut. Several shallow passes of
the router should be made and
it is not necessary to lean
heavily on the router or the jig.
Allow the weight of the router
to rest on the part of the
template which is resting on
the worktop. Ensure router
remains parallel and upright at
all times.
Routing the female part of the Joint
Location bushes
(Green dot)
Postform
edge
Length stop (or accessory
clamp PJ/CL/L) set for correct
worktop width on underside
Quick action
clamp here
Router feed
direction
Optional short clamp
PJ/CL/S on underside