AIRSHIELD
-12-
Battery Pack
■
Release the cover by lifting the left and right
lower sides to disengage the lugs then pull
forward and lift.
■
Insert finger into housing cut-out, lift battery
pack and unplug from connector.
■
Plug a fully charged battery pack into the
connector. Push the battery pack down into
the housing.
■
If two battery packs are fitted repeat for
opposite side. Lower the cover and push
backwards to engage the lugs into the holes.
Ensure the lugs are fully engaged in the
holes. Carry out a functional test.
Battery Safety Precautions:
Nickel-Metal Hydride AA Cell.
Never dispose of the battery pack by burning.
All Ni-MH cells are subject to special waste
disposal.
Always use the approved charger.
DO NOT ‘short’ the battery contacts.
DO NOT attempt to break into the battery case.
If the battery case breaks accidentally, avoid
contact with contents. Wash contaminated skin
with lots of water and seek medical attention if
necessary.
REPLACEMENT OF SPARE
PARTS
Replacement parts and accessories supplied by
Trend Machinery & Cutting Tools Ltd. should
only be used. The use of accessories not
supplied by Trend Machinery & Cutting Tools
Ltd. will not be guaranteed and invalidate such
National approvals as held by Trend Machinery
& Cutting Tools Ltd. Modifications to the
Airshield will make the approvals invalid and the
use illegal under National Laws and Guidance.
Trend Machinery & Cutting Tools Ltd.
replacement parts and accessories, must only
be used with the Trend Airshield.
Symptom Cause
Remedy
Reduced
Cover air holes Clear air
airflow
blocked
holes
Pre-filter
Fit a new
clogged
pre-filter
Main filter
Fit a new main
clogged
filter
Battery flat
Fit a recharged
battery pack(s)
No airflow Airshield
Press switch to ON
switched OFF
Switch faulty
Return to
manufacturer
Battery pack
Fit a fully charged
not fitted
battery pack
Battery pack
Push fully home
connection
Battery pack
Fit a fully charged
discharged
battery pack
Fan-motor unit Fit replacement
failure
fan-motor unit
STORAGE
The Airshield should be placed in the carry bag,
stored within a temperature range of 0°C to 45°C
and out of direct sunlight. Replacement filters
are to be left in their sealed bags and expiry
dates to be checked regularly.
TRANSPORTATION
The complete respirator should be transported in
the carry bag provided. Good quality
commercial packing should be used.
MANU-AIR v5.0 16/5/05 11:24 am Page 12
