Trelock COCKPIT2 FC 525, Manual

Page: 17 / 35

5.5 Entering the code number
In the “Code No. 1” bzw. “Code
No. 2” window, enter the 4-digit
code of the sensor to register this
on the computer. Smooth, unin-
terrupted communication between
the computer and the sensor
is assured by the Radio Select
technology only once the sensor is
registered. If the cycle or computer
is stolen, the computer is of no use
to the thief.
You will fi nd the code number on
a peel-off sticker on the sensor.
You should remove the sticker and
stick it in the instruction manual.
Press the MODE button repea-
tedly until the fi rst digit has been
correctly entered, then press the
SET button to confi rm. Repeat
the procedure for the each of the
other digits.
53