Trelawny 735.7072, Operation And Maintenance Manual, Page: 10 / 14

PARTS LIST
Trelawny tools are thoroughly tested under specified conditions in accordance with applicable internationally recognised standards. When a tool is used on site the
conditions may not be the same as those used in our tests
Trelawny Surface Preparation Technology operates a policy of continuous product development and refinement and therefore reserves the right to change technical
specifications and product designs without giving prior notice.
© Copyright 2013, Trelawny SPT Limited, CV31 1XT. UK All rights reserved. Any unauthorised use or copying of the contents or part thereof is prohibited. This applies to
trademarks, model denominations, part numbers and drawings.
Use only genuine Trelawny spares.
The use of non-Trelawny spare parts invalidates the warranty.
Ref Part No Description
1 370.8740A-01 Motor housing
2 370.8740A-02 Spring pin
3 370.8740A-03 Air inlet
4 370.8740A-04 Throttle lever
5 370.8740A-05 Pin
6 370.8740A-06 Valve seat
7 370.8740A-07 O’Ring
8 370.8740A-08 Spring
10 370.8740A-10 Valve stem
12 370.8740A-12 Plunger
13 370.8740A-13 Bearing (2)
14 370.8740A-14 Rear plate
15 370.8740A-15 Rotor
16 370.8740A-16 Rotor blade (4)
17 370.8740A-17 Spring pin
18 370.8740A-18 Cylinder
19 370.8740A-19 Front end plate
20 370.8740A-20 Bearing
21 370.8740A-21 Gasket
22 370.8740A-22 Bevel gear
23 370.8740A-23 Gear housing
24 370.8740A-24 Spring washer
25 370.8740A-25 Screw
26 370.8740A-26 Spacer
27 370.8740A-27 Screw
28 370.8740A-28 Bearing
29 370.8740A-29 Circlip
30 370.8740A-30 Bevel gear
31 370.8740A-31 Wave washer
32 370.8740A-32 Bearing
33 370.8740A-33 M10 Spindle
34 370.8740A-34 Key
35 370.8740A-35 Spacer
36 370.8740A-36 Bearing cap
37 370.8740A-37 4” Disc cover
38 370.8740A-38 M10 Flange
39 UT8740A-39 Spring pin
40 370.8740A-40 M10 Flange nut
41 370.8740A-41 Adjust screw
42 370.8740A-42 Adjust nut
43 370.8740A-43 Screw (4)
44 370.8740A-44 Inlet guide
45 370.8740A-45 Spring
Ref Part No Description
46 370.8740A-46 Governor
47 370.8740A-47 Pendulum (6)
48 370.8740A-48 Spring pin (2)
49 370.8740A-49 O’Ring
50 370.8740A-50 Spring
51 370.8740A-51 Safety bar
52 370.8740A-52 Spring pin
53 370.8740A-53 Exhaust diffuser
54 370.8740A-54 Vibration reduced handle
55 370.8740A-55 Pin wrench
56 370.8740A-56 Retaining ring
57 370.8740A-57 Bushing
58 370.8740A-58 O’Ring
59 370.8740A-59 Spring
60 370.8740A-60 Spindle lock button
61 370.8740A-61 Grub screw
62 370.8740A-62 O’Ring
63 370.8740A-63 Clamp
64 370.8740A-64 Hose
65 370.8740A-65 Exhaust
66 370.8740A-66 Exhaust hose
68 370.8740A-68 Spring
69 370.8740A-69 Lock ring (spring)
70 370.8740A-70 Disc spring
71 370.8740A-71 Circlip
79 370.8740A-79 Felt oiler
80 370.8740A-80 Steady
81 370.8740A-81 Spacer
82 UT8740A-82 Oil cap
NOT SHOWN
851.4050 Disc wheel (For use on steel only)
491.4050 Pack of 5 x Disc wheel
851.4075 120grit Flap wheel
851.4080 60grit Flap wheel
851.4085 36grit Flap wheel