Page
32
of
35
Model - K2
Chassis Number -
GMDN number -
Year of manufacture -
7.
Troubleshooting
The Trekinetic K2 is an advanced machine, with tightly integrated mechanical
components. It is crucial that it is maintained in line with the guidance in this
manual and serviced regularly to ensure good working order. The below list
however provides some suggestions to some known issues in all cases, please
switch off power before performing checks.
1.
Wheelchair feels ‘wobbly’ or pulling to one side
•
Camber bar
not fully tightened (rotated) in direction of either ‘MEAN’ or
‘LEAN.
o
There is no acceptable mid position between the two extremes
so it must be fully set at one position.
•
Incorrect tyre pressures
o
Re-pressurise to correct tyre pressure
•
Wheels and quick release axles not pushed fully in.
o
Refit correctly
•
Rear strut bracket not full engaged
o
Refit correctly
•
Rear castor loose
o
Speak to dealer
•
Screws loose
o
Check all nuts and bolts and tighten
2.
Wheelchair not running straight
