Page
27
of
35
optional Safari kit contains all the required equipment for dealing with either rear
or front wheel punctures, including the relevant 10mm spanner or Allen key to
remove the rear wheel.
For the rear wheel, use the hexagonal key set and undo the bolt holding the rear
wheel on. Note the positions of the two washers, between the wheel bearings and
the castor fork. For a reminder see sections 2-7 of
which describes this
process in more detail. Fit the new wheel, checking it spins freely. Inflate the tyre
to 45-50 psi (or firm to touch) with the mini pump, also in the Safari kit (pic below).
On some
19”
models (only) you will need to remove the sealing plug and access
the spare wheel retaining screw from above.