49
TREK SERVICE INFORMATION August 2016
Figure 14.32. Tightening the axle bolt
Figure 14.31. Inserting the non-drive side axle
3. Insert the wave washer into the non-drive side seal seat (Figure 14.30).
Figure 14.29. Greasing the bearing cups
Figure 14.30. Inserting the Wave washer (after the
washer) on the non-drive side
4. Slide the non-drive side axle through the seal seat and bottom bracket shell (Figure
14.31).
To Install The Drive Side Bearings
1.
Insert a washer into the drive side seal seat.
2. Apply a liberal coat of grease to the contact surfaces of the bearing (Figure 14.32) and
the drive side seal seat (Figure 14.33).
