manualshive.com logo in svg

Tregaskiss TOUGH GUN CA3 Series, Owner'S Manual

Share
Download
Tregaskiss TOUGH GUN CA3 Series Owner'S Manual Download Page 10

10

1-7 Commercial Warranty

Product is warranted to be free from defects in material and 

workmanship for the period specified below after the sale by 

an authorized Buyer.

TOUGH GUN™ Robotic MIG Guns and Components …... 1 year

TOUGH GUN™ Automatic MIG Guns.................................1 year

TOUGH GUN™ Reamer …………………………..…….. 1 year

TOUGH GUN™ Reamer when factory-equipped 

          with Lubricator …………………………........…. 2 years

TOUGH GUN™ Reamer when factory-equipped

          with Lubricator and used only with Tregaskiss™

          TOUGH GARD™ Anti-Spatter Liquid ……....……. 3 years

TOUGH GUN™ Robotic Peripherals

(Clutch, Sprayer, Wire Cutter, Mounting Arms) ………... 1 year

Low-Stress Robotic (LSR) Unicables …………………. 2 years

Tregaskiss reserves the right to repair, replace, or refund the 

purchase price of non-conforming product. Product found not 

defective will be returned to the Buyer after notification by      

Customer Service.

Tregaskiss makes no other warranty of any kind, expressed or 

implied, including, but not limited to the warranties of 

merchantability or fitness for any purpose. Tregaskiss shall not 

be liable under any circumstances to Buyer, or to any person who 

shall purchase from Buyer, for damages of any kind, including, 

but not limited to any direct, indirect incidental or consequential 

damages or loss of production or loss of profits resulting from 

any cause whatsoever, including, but not limited to any delay, act, 

error or omission of Tregaskiss.

Genuine Tregaskiss™ parts must be used for safety and 

performance reasons or the warranty becomes invalid. Warranty 

shall not apply if accident, abuse, or misuse damages of a 

product, or if a product is modified in any way except by 

authorized Tregaskiss personnel.

SECTION 2 - SPECIFICATIONS

2-1 System Components

Robotic MIG Gun for GMAW Welding

Duty Cycle Rating:

100%: 385 amps with Mixed Gases

Solid Mount

Connector

Nozzle

Contact Tip

Retaining Head

QUICK LOAD™

Liner

Neck Insulator

Neck

Clutch Mount

Connector

16 mm

M6 SHCS

Mounting Arm

Not Provided

Insulating Disc

Cable Guide

Replaceable

Unicable

Connector

Housing

Cable Connector

Cover

Connector

For complete parts list, please see 

SECTION 6 – PARTS LIST

Summary of Contents for TOUGH GUN CA3 Series



























Reviews:

No comments

Brands by name

Popular brands

Load more brands