19
Fusion Spa
minipool
EN
With the bathtub full, recirculation active and ozone active, start all the functions of the bathtub in sequence in the
presence of the owner to verify proper operation.
WATER TEMPERATURE ADJUSTMENT
Pressing
the "
+
" or "
-
" keys will vary the setting of the water temperature by
+/- 0.5°C
(the standard value at startup
is 35°C, the temperature range is from 10°C to 40°C).
After three seconds of inactivity, the display will return to standby and the corresponding LED will be off.
When the bathtub is turned on the last value is recalled and loaded.
WHIRLPOOL
Pressing the
key (WHITE KEYPAD) or the
key (BLACK KEYPAD) will activate the whirlpool function in
the perimeter slot present in the minipool (default duration 20 minutes). Press the key again to stop the function.
The first time it is recommended to leave the whirlpool in operation for at least 2-3 minutes to expel the air that may
be present in the plumbing system.
CHROMATHERAPY
Chromatherapy
is started by:
pressing the “Light” key
pressing the “Light” key
Activates a sequence of 16 colours that vary in an automatic sequence.*
During the sequence, pressing the "Light" key again stops on the current colour (e.g., Red): the sequence is interrupted
and remains fixed on the chosen colour.
If you want to change this colour, by repeatedly pressing the "Light" key you can run through all the colours to
choose a different one.
Once you have selected a fixed colour, to return to the automatic sequence you must turn off and reactivate the function.
Hold the "Light" key for two seconds to turn off the function.
If not switched off manually, the function stops automatically after three hours.
The function can always be activated, even if the water level is low.
