Intex SimpleSpa SB-B10 Owner'S Manual Download

Page: 1 / 23

348

(348PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 10/25/2019

English

OWNER’S

MANUAL

SimpleSpa™

SB-B10

Do not forget to try these other fine Intex products: pools, pool

accessories, in-home toys, airbeds and boats available at fine

retailers or visit our website.
Due to a policy of continuous product improvement, Intex reserves

the right to change specifications and appearance, which may

result in updates to the instruction manual without notice.

For illustrative purposes only.

IMPORTANT

SAFETY RULES

Please read, understand, and follow all

instructions carefully before installing

and using this product. Keep for future

reference.

IMPORTANT!

DO NOT RETURN PRODUCT TO STORE

To purchase parts and accessories or to obtain non-technical assistance, visit

www.intexcorp.com

For technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):

1-800-234-6839

Monday through Friday, 8:30am to 5:00pm Pacific Time

348-*PO-R0-2011

Summary of Contents for SimpleSpa SB-B10
























Search results

Summary of Contents for SimpleSpa SB-B10

Reviews:

Related manuals for SimpleSpa SB-B10

Brands by name

Popular brands

Intex SimpleSpa SB-B10, Owner'S Manual

Search results

Summary of Contents for SimpleSpa SB-B10

Reviews:

Related manuals for SimpleSpa SB-B10

Brands by name

Popular brands