Intex SimpleSpa SB-B10 Owner'S Manual Download

Page: 2 / 23

348

S AVE THESE INSTRUCTIONS

(348PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 10/25/2019

English

Page 2

TABLE OF CONTENTS

WARNING:

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are desi gned to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Warning.......................................................................................... 3-4

Parts............................................................................................... 5-6

Set-up............................................................................................. 7-12

Operation....................................................................................... 13

LED Code Chart............................................................................. 14

Maintenance and Chemicals........................................................ 15-20

Storage........................................................................................... 20

Troubleshooting............................................................................ 21-22

Warranty......................................................................................... 23

Summary of Contents for SimpleSpa SB-B10
























Search results

Summary of Contents for SimpleSpa SB-B10

Reviews:

Related manuals for SimpleSpa SB-B10

Brands by name

Popular brands

Intex SimpleSpa SB-B10, Owner'S Manual

Search results

Summary of Contents for SimpleSpa SB-B10

Reviews:

Related manuals for SimpleSpa SB-B10

Brands by name

Popular brands