HOW TO RECHARGE
1.
To promote the shelf life of the shaver, it is highly recommended
to recharge your appliance only after the battery is completely
exhausted. Otherwise you must discharge the appliance before
your charge it. To discharge, turn the shaver on until its battery
has run down.
2.
Please check the power supply before recharging the shaver. The
standard voltage is DC5V 2W.
3.
The shaver should not be recharged under temperature of
5-35
℃
.
4.
For safety purpose, please make sure both the shaver and its
power socket are completely dry before recharging.
5.
Turn the On/Off switch off and securely attach the charging
adapter into the socket. Conned to power outlet. The indicator light will turn on when it
is being recharged. Take note that the shaver should be placed upright when charging to
avoid unwanted damages.
HOW TO USE
1.
Remove the cover and push the On/Off switch upward to turn on the shaver.
2.
Stretch your skin with free hand and hold the shaver at a right angle to the skin. Gently
shave over the desired area.
3.
When shaving, be sure not to apply too much pressure to avoid injuries to your skin. You
may require a little time to get used to the new shaving method of our product.
4.
After you have finished shaving, turn off the shaver and replace the cover.
HOW TO REPLACE THE OUTER FOIL AND INNER BLADES
1.
Turn the ON/Off switch off before replacing the outer foil.
2.
Detach the outer foil hood. Hold on the foil with fingers
at”, ”point[indicated as(1)(2) in the diagram] and pull out. Repeat the
same on opposite side to completely release the foil.
