The control panel
Key (with indicator)
Function
ON/OFF
Start or stop the appliance
ICE
Standby mode: “ICE” indicator blinks;
Working condition: “ICE” indicator lights solidly.
ICE FULL
“ICE FULL” indicator lights up when the ice basket is full.
ADD WATER
“ADD WATER” indicator lights up when the water
reservoir is lack of water.
Before first use
1.
Unpack the appliance, then check and make sure that all the accessories including ice basket and ice
scoop etc. are complete. Please contact with the client service department if some accessories are
missed.
2.
Please follow the operation as below to install the handle well in position.
o
Grasp both sides of the handle shown in arrows with hands and pull them outwards (see Fig.1).
o
Make the handle align with the holes at the housing and release the hands, then the handle is
inserted into the holes of the housing (see Fig.2).
o
Pull and make the handle be upright, then pull both sides of the handle outwards by following
the operation of Step 1). Check and make sure that the handle shall be positioned well at the
holes of housing.
o
Grasp the center of handle and lift it upwards, check and make sure that there shall be no
abnormal condition can be found.
