15
3.
Using the device for making popcorn
Check whether the device is clean and dry, make sure that it’s switched off
and the plug is removed from the wall socket.
STEP 1: Place the device onto a flat, stable surface at a height comfortable
for the user.
STEP 2: Measure one levelled off spoon of oil or butter, apply the oil or
butter on the hot place and carefully rub it into the hot plate using kitchen
towel.
STEP 3: Insert the plug of the device into a wall socket.
STEP 4: Switch on the device using the power switch. The indicator will
switch on.
STEP 5: Let the device preheat for approx. 1.5 to 2 minutes. The indicator
turns off as soon as the required temperature is reached.
STEP 6: Measure 50g to 60g kernels using the measuring cup and pour them
onto the hot plate. Never use more than 60g kernels at once, to avoid
kernels overflowing, touching and then injuring the user.
STEP 7: Place the pull tab of the serving bowl next to arrow on the device
and then rotate the serving bowl 90° clockwise until it clicks into its place.
Remove the lid from the bowl to let the steam escape.
STEP 8: Use the handle to lightly shake the device to ensure that all kernels
are equally covered with oil. It’ll take approx. 5 to 6 minutes until all of the
kernels are popped.
STEP 9: When the popcorn is ready, turn the device off using the power
switch and remove the wall socket from the wall socket. Replace the lid onto
the serving bowl.
STEP 10: Hold the device at its handle, turn it upside down and rotate the
serving bowl 90° anti-clockwise to remove it from the device.
STEP 11: You may now use the bowl to serve delicious popcorn.
