Trebs CC-120, User Manual

Page: 8 / 35

-5-
INSTALLATION
4. Install the license plate
to the frame.
TRE-BS-132 TRE-BS-132
1. Loosen the license plate
bolt or screw, and then
remove the license plate
on the rear of your car.
2. Drill one hole for power cable
in the middle of below license
plate, where the camera will
exist.
3. Install the frame camera
with bolt/screw, and adjust
the camera to a suitable
angle. Tow the power wire
into the car through the
interstices of the car.
Installation of the camera:
TRE-BS-132