Trebs CC-120, User Manual

Page: 7 / 35

We advise to test the system before installation to prevent any
damage on the vehicle. Follow the steps mentioned below
precisely to test the system.
1. Connect 12V car adaptor to the vehicle's cigarette lighter and
connect the black and yellow plugs to the monitor.
2. Search at the rear of the vehicle for find back up light wiring.
3. Splice the red wire of the Transmission Box power cable to
the reverse light's positive (+) wire of the vehicle.
4. Splice the black wire of the Transmission Box power cable to
the reverse light's negative (-) wire of the vehicle.
5. Replace the reverse light bulb, and then re-install the light
socket. Re-attach the negative battery cable to the battery.
6. Engage the parking brake and turn the ignition key to the
ON position. DO NOT start the vehicle. Put the gear shift
into reverse.
7. The camera will start broadcasting, and the monitor will
detect the signal and turn itself ON. If the monitor does
not come ON, press the ON/OFF button.
8. If the image does not match your rear view mirror, press
the mode button on the monitor to change the image
until it matches your rear view mirror.
9. When you take the gear shift out of reverse the camera
will turn OFF, and the monitor will turn black.
-4-