T-MAXX • 7
QUICK START: GETTING UP TO SPEED
The following guide is an overview of the procedures for getting your T-Maxx running, from opening the box to breaking in and tuning your
engine. Refer to the pages indicated for details on each step. Look for the Quick Start logo on the bottom corners of Quick Start pages.
1. Read the safety precautions on page 4
10. Range test the radio system • See page 12
For your own safety, understand where carelessness and misuse could
lead to personal injury.
Follow this procedure to make sure your radio system works properly at
a distance and that there is no interference from outside sources.
2. Charge the EZ-Start battery pack • See page 22
11. Fill the fuel tank • See page 19
The EZ-Start requires a fully charged 7.2-volt battery pack (included).
Use your fuel-dispensing bottle to fill the tank.
3. Install the antenna • See page 10
12. Connect the EZ-Start to the model • See page 22
The receiver antenna and antenna tube must be properly installed
before operating your model.
Learn the proper way to use the EZ-Start electric starting system.
4. Install batteries in the transmitter • See page 10
13. Start the engine • See page 24
T-Maxx requires 4 AA alkaline or rechargeable batteries*
for the transmitter.
Learn to use the correct starting procedure for your TRX 2.5.
5. Decal and Install the body • See page 8
14. Break-in your engine • See page 24
You will need to use the body during break in, so it’s best to apply any
additional decals before you use the body.
Follow the break-in instructions exactly to ensure the
best-performing, longest-lasting engine.
6. Install the receiver batteries • See page 10
15. Tune your engine • See page 26
T-Maxx requires 4 AA alkaline or rechargeable batteries* for
the receiver.
Learn how to set the fuel mixture needles for optimum
engine performance.
7. Install the EZ-Start battery • See page 22
16. Drive your T-Maxx • See page 29
Install and connect a charged 7.2-volt battery pack in
the EZ-Start controller.
Learn to use the two-speed and reverse functions on your truck, along
with important driving precautions.
8. Turn on the radio system • See page 11
17. Maintain your Truck • See pages 33-34
Make a habit of turning the transmitter on first and off last.
Follow these critical steps to maintain the performance of your
T-Maxx and keep it in excellent running condition.
9. Check servo operation • See page 12
Make sure the throttle, shifting, and steering servos are
working correctly.
The Quick Start Guide is
not intended to replace the
full operating instructions
available in this manual.
Please read this entire
manual for complete
instructions on the proper
use and maintenance of
your T-Maxx.
Look for the Quick Start
logo at the bottom of
Quick Start pages.
*sold separately
49104-1-KC2230-R00-T-Maxx-Operating.indd 7
10/30/14 5:10 PM
