SLASH • 5
TOOLS, SUPPLIES AND REQUIRED EQUIPMENT
Your model comes with a set of specialty metric tools. You’ll need to purchase other items, available from your hobby dealer, to operate
and maintain your model.
SUPPLIED TOOLS AND EQUIPMENT
For more information on
batteries, see
Use the Right
Batteries
on page 11.
A peak-detecting charger
is recommended for best
performance and longest
battery life. For more
information, see
Use the
Right Charger
on page 10.
2.0mm “L” wrench
1.5mm “L” wrench
Turnbuckle wrench
U-joint wrench
4-way wrench
Aftermarket
servo adapters
Pre-load spacers and shock pistons
(on parts tree)
see page 19
Battery hold-down pad
(to reduce
battery vibration, if necessary)
Body clips and
body washers
2.5mm “L” wrench
Optional Pinion
Gear
see page 20
Optional Spur
Gear
see page 20
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Thin, hobby-quality
cyanoacrylate instant tire
glue (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Philips screwdriver
• Soldering iron
Antenna nut
wrench
8 AA alkaline
batteries
REQUIRED EQUIPMENT
(sold separately)
NiMH 7.2V to 8.4V 6 or 7-cell battery pack
with Traxxas High-Current Connector
NiMH battery charger
(peak detecting type recommended)
