SLASH • 13
Electronic Throttle Trim
The electronic throttle trim located on the face of the transmitter
adjusts the neutral (center) point of the throttle servo when the
servo is at rest. Your model uses an electronic speed control
instead of a throttle servo, this control has been preset for you at
the factory.
Electronic Steering Trim
The electronic steering trim located on the face of the transmitter
adjusts the neutral (center) point of the steering servo when
the servo is at rest. Adjust this control to make the model drive
straight with no steering input at the wheel.
Servo Reversing Switches
The servo reversing switches are located on the front of the
transmitter, next to the on/off switch. Moving a switch reverses
the direction of the corresponding servo.
Each switch corresponds to a channel, as shown below. For
example, if you turn the steering wheel to the right and your
wheels turn left, you would move the Channel 1 switch to
correct the servo direction. It may be necessary to adjust the
corresponding trim control after moving a switch.
Channel
1
2
Servo
Steering
Throttle
Default Setting
THE TRAXXAS TQ RADIO SYSTEM
