background image

4 • EZ-PEAK LIVE

 

 

•   NEVER charge batteries on wood, cloth, carpet or on 

any other flammable material.

•   ALWAYS charge batteries in a well-ventilated area.
•   REMOVE flammable items and combustible 

materials from the charging area.

•   DO NOT leave the charger and battery unattended 

while charging, discharging, or any time that the 
charger is ON with a battery connected. If there 
are any signs of a malfunction or in the event of an 
emergency, unplug the charger from the power 
source and disconnect the battery from the charger.

•   Remote monitoring via the EZ-Peak Live App is not a 

substitute for being present to watch over and tend 
to batteries being charged. Batteries being charged 
should always be visible and monitored in person in 
case there is an unexpected problem that requires 
immediate attention.

•   DO NOT operate the charger in a cluttered space, or 

place objects on top of the charger or battery.

•   If any battery or battery cell is damaged in any way, 

do NOT charge, discharge, or use the battery.

•   Keep a Class D fire extinguisher nearby in case of fire.
•   BEFORE you charge, ALWAYS confirm that the 

charger settings exactly match the type (chemistry), 
specification, and configuration of the battery to be 
charged.

•   DO NOT exceed the battery manufacturer’s maximum 

recommended charge rate.

•   DO NOT disassemble, crush, short circuit, or expose 

the batteries or cells to flame or any other source of 
ignition.

•   If a battery gets hot to the touch during the charging 

process, disconnect the battery from the charger and 
discontinue charging immediately.

•   ALWAYS unplug the charger and disconnect the 

battery when not in use.

WARNING!  CAUTION!  DANGER! (continued)

FIRE HAZARD!

Summary of Contents for EZ-Peak Live iD 2971





























Reviews: