background image

4 • E-REVO BRUSHLESS

This model is not intended 
for use by children under 
14 years of age without the 
supervision of a responsible 
and knowledgeable adult.

All instructions and 
precautions outlined in this 
manual should be strictly 
followed to ensure safe 
operation of your model.

SAFETY PRECAUTIONS

Previous experience with radio 
controlled models is recommended. 
Models require a higher level of setup, 
maintenance, or support equipment.

Not a Toy! For Expert Drivers Only. 
This product is capable of extreme 
speed and acceleration! It carries our 
expert skill level rating and is intended 
for highly experienced drivers only. 
Experience with high-powered radio 
controlled models is required!

Skill Level = Myriad Semi Bold

1 2 3 3+ 4 5

bluehighway font

For Expert Drivers

Choose the Model That is Right For You.

For individual Models

No previous experience with radio controlled models is required.

Models require a minimum of setup, maintenance, or support equipment. 

Previous experience with radio controlled models is mandatory. These 

models are capable of high speeds, requiring experienced driving control. 

Models require detailed setup, and/or maintenance procedures with required 

support equipment. 
Previous experience with radio controlled models is mandatory. 

These models are capable of very high speeds and require an even higher 

level of skilled driving control. Models require detailed setup, and/or mainte-

nance procedures with required support equipment. 

For Expert Drivers Only.

 This product is capable of extreme speed 

and acceleration! It carries our highest skill level rating and is intended 

for expert drivers only. Experience with nitro-powered radio controlled 

models is required!

Previous experience with radio controlled models is recommended.

Models require a higher level of setup, maintenance, or support equipment. 

No previous experience with radio controlled models is required.

Model requires a minimum of setup, maintenance, or support equipment. 

Previous experience with radio controlled models is mandatory. This model is 

capable of high speeds, requiring experienced driving control. Model requires 

detailed setup, and/or maintenance procedures with required support 

equipment. 

Previous experience with radio controlled models is mandatory. This model is 

capable of very high speeds and requires an even higher level of skilled driving 

control. Model requires detailed setup, and/or maintenance procedures with 

required support equipment. 

For Expert Drivers Only.

 This product is capable of extreme speed 

and acceleration! It carries our highest skill level rating and is intended 

for expert drivers only. Experience with nitro-powered radio controlled 

models is required!

 Previous experience with radio controlled models is recommended.

Model requires a higher level of setup, maintenance, or support equipment.

BELOW TEXT HAS BEEN UPDATED on 3-14-07
Kent wants maintenance text to be at the END of the paragraph.-- KB

Skill Level = Myriad Semi Bold

1 2 3 3+ 4 5

bluehighway font

For Expert Drivers

Choose the Model That is Right For You.

For individual Models

No previous experience with radio controlled models is required.

Models require a minimum of setup, maintenance, or support equipment. 

Previous experience with radio controlled models is mandatory. These 

models are capable of high speeds, requiring experienced driving control. 

Models require detailed setup, and/or maintenance procedures with required 

support equipment. 
Previous experience with radio controlled models is mandatory. 

These models are capable of very high speeds and require an even higher 

level of skilled driving control. Models require detailed setup, and/or mainte-

nance procedures with required support equipment. 

For Expert Drivers Only.

 This product is capable of extreme speed 

and acceleration! It carries our highest skill level rating and is intended 

for expert drivers only. Experience with nitro-powered radio controlled 

models is required!

Previous experience with radio controlled models is recommended.

Models require a higher level of setup, maintenance, or support equipment. 

No previous experience with radio controlled models is required.

Model requires a minimum of setup, maintenance, or support equipment. 

Previous experience with radio controlled models is mandatory. This model is 

capable of high speeds, requiring experienced driving control. Model requires 

detailed setup, and/or maintenance procedures with required support 

equipment. 

Previous experience with radio controlled models is mandatory. This model is 

capable of very high speeds and requires an even higher level of skilled driving 

control. Model requires detailed setup, and/or maintenance procedures with 

required support equipment. 

For Expert Drivers Only.

 This product is capable of extreme speed 

and acceleration! It carries our highest skill level rating and is intended 

for expert drivers only. Experience with nitro-powered radio controlled 

models is required!

 Previous experience with radio controlled models is recommended.

Model requires a higher level of setup, maintenance, or support equipment.

BELOW TEXT HAS BEEN UPDATED on 3-14-07
Kent wants maintenance text to be at the END of the paragraph.-- KB

• Don’t Get Burned: The ESC and motor can become extremely hot during 

use, so be careful not to touch them until they cool. Supply adequate 
airflow for cooling.

• Use the Factory-Installed Stock Connectors: Do not change the battery and 

motor connectors. Improper wiring can cause fire or damage to the ESC. 
Please note that modified speed controls can be subject to a rewiring fee 
when returned for service.

• No Reverse Voltage: The ESC is not protected against reverse polarity 

voltage. 

• No Schottky Diodes: External Schottky diodes are not compatible with 

reversing speed controls. Using a Schottky diode with your speed control 
will damage the ESC and void the 30-day warranty.

• Always adhere to the minimum 

and maximum limitations of 
the speed control as stated in 
the specifications table on page 
18. If your ESC operates on two 
batteries, do not mix battery 
types and capacities. Use the 
same voltage and capacity 
for both batteries. Using 
mismatched battery packs could 
damage the batteries and electronic speed control.

LiPo Batteries

Lithium Polymer (LiPo) batteries are becoming popular for use in R/C 
models due to their compact size, high energy density, and high-current 
output. However, these types of batteries require special care and handling 
procedures for long life and safe operation. 

WARNING: 

LiPo batteries are 

intended only for advanced users that are educated on the risks associated 
with LiPo battery use. 

Traxxas does not recommend that anyone under the 

age of 14 use or handle LiPo battery packs without the supervision of a 
knowledgeable and responsible adult. 

Your model is able to use LiPo batteries. LiPo batteries have a minimum safe 
discharge voltage threshold that should not be exceeded. The electronic 
speed control is equipped with built-in Low-Voltage Detection, which 
alerts the driver when LiPo batteries have reached their minimum voltage 
(discharge) threshold.

 It is the driver’s responsibility to stop immediately 

to prevent the battery pack from being discharged below its safe 
minimum threshold.

Low-Voltage Detection on the speed control is just one part of a 
comprehensive plan for safe LiPo battery use.

 It is critical for you, the user, 

to follow all other instructions supplied by the battery manufacturer and 
the charger manufacturer for proper charging, use, and storage of LiPo 
batteries.  Make sure you understand how to use your LiPo batteries. 

Be 

aware that Traxxas shall not be liable for any special, indirect, incidental, 
or consequential damages arising out of the installation and/or use of 
LiPo batteries in Traxxas models. If you have questions about LiPo battery 
usage, please consult with your local hobby dealer or contact the battery 
manufacturer. As a reminder, all batteries should be recycled at the end of 
their useful life.

TERMS OF USE

 - The buyer assumes all risk associated with using this 

product. Traxxas, its affiliates, manufacturers, distributors, and retail partners 
cannot control the use, application, charging, or installation of this product 
and shall not be held responsible for any accident, injury to persons, or 
damage to property resulting from the use of this product. 

After reading all, if you do not agree with these terms and conditions and 
are not prepared to accept complete liability for the use of this product, 
return this product immediately in new/unused condition to your place of 
purchase. 

Your retailer absolutely cannot accept product for return or 

exchange if it has been used in any way.

If you have any questions, call Traxxas Customer Support at 1-888-TRAXXAS 
(1-888-872-9927) Outside the US +1-972-265-8000 or e-mail support@
traxxas.com.

1500

3600

Do not mix battery 

capacities. Use two 

batteries with the  

same capacity. 

1500

3600

Do not use a 6-cell 7.2V 

battery in combination 

with a 7-cell battery 

8.4V pack.

WARNING!   CAUTION!   DANGER! 

FIRE HAZARD!

 

Charging and discharging batteries has the potential for 

fire, explosion, serious injury, and property damage if not performed per the 
instructions. In addition, Lithium Polymer (LiPo) batteries pose a SEVERE risk of 
fire if not properly handled per the instructions. Before use, read and follow all 

manufacturer’s instructions, warnings, and precautions. Never allow children under 14 years old 
to charge or use LiPo batteries without the supervision of a responsible, knowledgeable adult.

• While charging or discharging, ALWAYS place the battery (all types of batteries) in a fire 

retardant/fire proof container and on a non-flammable surface such as concrete.

• ALWAYS charge batteries in a well-ventilated area.

• REMOVE flammable items and combustible materials from the charging area.

• ONLY use a Lithium Polymer (LiPo) balance charger with a balance adapter to charge LiPo 

batteries.

• If any battery or cell is damaged in any way, DO NOT charge, discharge, or use the battery.

• BEFORE you charge, ALWAYS confirm that the charger settings exactly match the battery 

type (chemistry), specification, and configuration to be charged.

• DO NOT exceed the maximum manufacturer recommended charge rate.

• DO NOT disassemble, crush, short circuit, or expose the batteries to flame or other source  

of ignition.

• NEVER leave batteries unattended while charging.

Model #5608L

Model #5608

Summary of Contents for E Revo 5608





































Reviews: