Traxxas E Revo 5608 Owner'S Manual Download

Page: 31 / 36

TRAXXAS • 31

The model’s TQi transmitter is equipped with the new TQi Docking Base. This
innovative accessory transforms your iPhone

or iPod touch

into a powerful

tuning tool that equips your TQi with an intuitive, high-definition, full-color
graphical user interface.

Traxxas Link

The powerful Traxxas Link app (available in the Apple App Store) gives you
complete control over the operation and tuning of your Traxxas model with
stunning visuals and absolute precision. With Traxxas Link telemetry sensors
installed on the model (sold separately), Traxxas Link displays real-time data
such as speed, rpm, temperature, and battery voltage.

Intuitive iPhone and iPod touch interface

Traxxas Link makes it easy to learn,
understand, and access powerful
tuning options. Control Drive
Effects settings, such as steering
and throttle sensitivity, steering
percentage, braking strength,
and throttle trim, are available by
simply touching and dragging the
sliders on the screen.

Real-Time Telemetry

With telemetry sensors installed
(sold separately), the Traxxas Link
dashboard comes to life, showing
you speed, battery voltage, rpm,
and temperature. Set threshold
warnings and log maximums,
minimums, or averages. Use the
recording function to document
your dashboard view, with sound,
so that you can keep your eyes
on your driving and not miss a
single apex.

Manage up to 30 Models with Traxxas Link

The TQi radio system automatically keeps track of what vehicles it has bound
to and what settings were used for each--up to 30 models total! Traxxas Link
provides a visual interface to name the models, customize their settings,
attach profiles, and lock them into memory. Simply choose a model and any
previously bound transmitter, power them up, and start having fun.

Installing Your Mobile Device

The TQi Docking Base has a unique clamping mechanism that allows the
Apple

iPhone

and iPod touch

to be easily installed and removed. The

clamp’s self-adjusting design allows it to accommodate the wide variety of
protective cases available for Apple products. Follow these steps to install
your mobile device:

1. Swing the Docking Base Clamp lever from

position A (locked) to position B (unlocked).

2. Install your mobile device by sliding it onto

the connector.

3. Ensure your mobile device is parallel with

the Docking Base. Slide the included foam
pads beneath the mobile device so it
is held parallel with the docking base
when supported by the pads. The pads
have thicknesses of 1, 2, 3, and 4mm;
choose the best combination for your
device and case, if used. See the chart
to find the correct pad combination
for iPhone and iPod touch models
without accessory cases.

4. Make certain your mobile device slides

directly onto the connector when slid
over the foam pads. When you are
satisfied with the fit, peel the backing
from the foam pads and apply them to
the Docking Base.

5. Close the Docking Base Clamp by moving it to position A. Confirm your

mobile device is snug and securely held in place.

Optional

: The Docking Base Clamp’s “fingers” have soft gripper pads on

them to hold un-cased devices. If your device is in a soft rubber case, the
gripper pads may be removed for easier device installation and removal.

ADVANCED TUNING GUIDE

Tap and slide to adjust Steering Sensitivity,

Throttle Trim, Braking Percent, and more!

The customizable Traxxas Link dashboard delivers

real-time rpm, speed, temperature, and voltage data.

Foam pad combination recommendations

(without accessory cases):