27
2.
Turn on the transmitter.
3.
Turn on the speed control.
4.
Press and hold the ESC SET button until the status LED turns
from solid red to solid green. Immediately release the ESC SET
button when it changes to green.
5.
The LED will now flash red.The number of red flashes
indicates the active throttle profile.
Profile #
Description
Flashes
1 (Default) ........Forward/Reverse/Brakes ..................1
2 ........................Forward only/Brakes ........................2
3 ........................Forward/25% Reverse/Brakes ........3
6.
Press the ESC SET button to select the throttle profile. Each
press will advance the setting to the next profile. Note: To
change the profile you must press the ESC SET button
immediately after the LED flashes the current setting.
Once the LED flashes the desired setting number, wait and
the LED will turn green and the EVX will exit the
programming mode.
Adjusting Your E-Maxx