background image

TRAXXAS • 3 

• The motor, batteries, and speed control can become hot during use. Allow parts to cool 

before handling.

• Do not leave the model unattended while it is turned on. Immediately turn the transmitter and 

model off after you have safely landed the model.

• Most importantly, use good common sense at all times. 

All instructions and precautions outlined in this manual should be strictly followed to 
ensure safe operation of your model. Failure to comply with the warnings, instructions, 
and precautions in this manual could lead to product damage and personal injury.

About Lithium Polymer (LiPo) Batteries

The included LiPo rechargeable battery must be handled with care for safety and 
long battery life. LiPo batteries are more volatile than alkaline, NiCad, and NiMH 

batteries. Mishandling of LiPo batteries can result in fire. By handling, charging, or using the 
included LiPo battery, you assume all risks associated with LiPo batteries. If you do not agree with 
these conditions, return your complete, unused Traxxas DR-1 helicopter to the place of purchase.
If at any time during charging or use the battery begins to swell or becomes damaged in any way, 
discontinue charging or use of the battery immediately. Continuing to charge or discharge a battery 
that has begun to balloon or swell can result in a fire. Quickly and safely disconnect the battery and 
place it in an open, safe area away from flammable materials. Observe the battery for at least 30 
minutes to be certain no additional swelling or rupture occurs. Completely discharge the battery by 
submerging it in a saltwater solution (1/2 cup salt per gallon of water) for 24 hours. The battery may 
then be disposed of in the trash. LiPo batteries are landfill-safe.

It is your responsibility to charge and care for the battery pack properly.

• The included LiPo battery pack must be charged ONLY with the USB charger included with the 

model or a Traxxas-specified accessory charger. Failure to use the correct charger may result in 
a fire, personal injury, and/or property damage. DO NOT use a charger designed for NiCad or 
NiMH batteries. Using any charger other than the included charger may damage the battery.

• Charge the battery in a safe area away from flammable materials.
• Allow the battery to cool to room temperature before recharging.
• Never leave batteries unattended while charging. Monitor the charging process and react to 

any problems that may occur.

• Always unplug the battery from the model when not in use and when it is being stored or 

transported.

• Do not use or charge battery packs that have been damaged in any way (bent, dented, swollen, 

torn covering, or otherwise damaged).

• Do not allow small children to charge or handle LiPo batteries.
• Only discharge the LiPo battery by using it to power your model. Do not discharge the battery 

using an accessory device.

• Store the battery and model in a dry area at room temperature. Avoid temperatures less than 

40°F/4°C and greater than 120°F/49°C. Do not store the battery or model in a car or in direct 
sunlight. If stored in a hot car or otherwise exposed to temperatures greater than 120°F/49°C, 
the battery can be damaged or may catch fire.

Included Support Equipment 

450 mAh LiPo battery
USB-powered Charger
Spare rotor blade set
Phillips screwdriver
4 Traxxas AAA alkaline batteries

Summary of Contents for 6307 DR-1 EZ-Connect

















Reviews: