Traxxas 53097-3 Owner'S Manual Download Page 53

Page: 53 / 59

Page 5

Revo: TRX 3.3, TQi 2.4GHz Radio System, Traxxas Link Wireless Module, & TSM (Model 53097-3) Parts List

REV. 180118 1408

5345X

Servo horns, steering and throttle (for non-Traxxas servos (Hitec, JR,
KO, Airtronics))

5345R

Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm
turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4)

5344X

Servo saver spring, heavy duty (for use with metal-gear servos)

2070

Servo, digital high-torque (ball bearing)

2075

Servo, digital high-torque (ball bearing), waterproof

2055 Servo,

high-torque

5338

Toe link, 5.0mm steel (front or rear) (2)

5338A

Toe links, Revo (Tubes 7075-T6 aluminum, black) (128mm, fits
front or rear) (2)/ rod ends, rear (4)/ rod ends, front (4)/ wrench (1)

5338R

Toe links, Revo (Tubes red-anodized, 7075-T6 aluminum,
stronger than titanium) (128mm, fits front or rear) (2)/ rod ends,
rear (4)/ rod ends, front (4)/ aluminum wrench (1)

Suspension Linkage

5355X

Hollow ball set, aluminum (30)/ tall centered hollow ball (2)/ tall offset
hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2)

5355

Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer
adjustment shims; 3.5mm (2), 1.17mm (2)

5339

Insert, threaded steel (replacement inserts for Tubes) (includes (1)
left and (1) right threaded insert)

5341

Linkage, steering (Revo 3.3) (3x50mm Turnbuckle) (2)/ rod ends
(short) (4)/ hollow balls (4)

5319X

Push rod (aluminum) (assembled with rod ends) (2) (red) (use
with #5359 progressive 3 rockers)

5318X

Push rod (aluminum) (assembled with rod ends) (2) (use with
long travel or #5357 progressive-1 rockers)

5319

Push rod (steel) (assembled with rod ends) (2) (black) (use with
#5359 progressive 3 rockers)

5318

Push rod (steel) (assembled with rod ends) (2) (use with long travel or
#5357 progressive-1 rockers)

5469

Rod ends (GTR shocks) (6)

5347

Rod ends, Revo (large) with hollow balls (12)

5348

Rod ends, Revo (large, for rear toe link only) (4)

5345R

Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm
turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4)

5321

Suspension pin set (front or rear, hardened steel), 3x20mm (4),
3x40mm (2))

5338

Toe link, 5.0mm steel (front or rear) (2)

5338A

Toe links, Revo (Tubes 7075-T6 aluminum, black) (128mm, fits
front or rear) (2)/ rod ends, rear (4)/ rod ends, front (4)/ wrench (1)

5338R

Toe links, Revo (Tubes red-anodized, 7075-T6 aluminum, stronger
than titanium) (128mm, fits front or rear) (2)/ rod ends, rear (4)/ rod
ends, front (4)/ aluminum wrench (1)

Team Traxxas Items

2514

Decal sheet, racing sponsors

6160X DVD,

Maxx

Power!

Full

Throttle Action (sleeve)

9950

Official Team Traxxas racing decal set (flag logo/ 6-color)

9909

Traxxas racing banner, red & black (3x7 feet)

Throttle & Brake Linkage

5388

Brake cam (1)/ sleeve (1)

3182 Collars,

screw

(2)/

set screws, 3mm (2)

5418

Linkage set, rear brake (Revo) (Includes: brake lever/ rod (wire)/
brake spring/ brake adjustment dial/ rod guide bushing/ screw
collar)

5368

Linkage set, throttle & brake, Revo-Slayer (includes servo horns, rod
guides, brake spring, brake adjustment dial, brake lever, rods (wires),
bellcrank, throttle return spring, hardware)

5392

Linkage, shift, Revo (includes: ball collar, spring, ball cup, servo horn,
linkage wire)

5341

Linkage, steering (Revo 3.3) (3x50mm Turnbuckle) (2)/ rod ends
(short) (4)/ hollow balls (4)

5345X

Servo horns, steering and throttle (for non-Traxxas servos
(Hitec, JR, KO, Airtronics))

5345R

Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm
turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4)

3966

Shoulder screws, 3x10mm (6) (with threadlock)

4046

Spring, throttle return (2) (Revo/Slayer)

Tires & Wheels

4147X

Nuts, 5mm flanged nylon locking (aluminum, blue-anodized) (4)

5147X

Nuts, 5mm flanged nylon locking (steel, serrated) (8)

4955

Pins, axle (2.5x12mm) (4)

5189

Screw pins, 4x13mm (with threadlock) (4)

3965

Screws, 2.5x8mm cap-head machine (6)

5666

Sidewall protector, beadlock style (blue) (2)/ 2.5x8mm CS (24)
(for use with Geode wheels)

5664

Sidewall protector, beadlock style (green) (2)/ 2.5x8mm CS (24)
(for use with Geode wheels)

5667

Sidewall protector, beadlock style (red) (2)/ 2.5x8mm CS (24) (for
use with Geode wheels)

5665

Sidewall protector, beadlock style (yellow) (2)/ 2.5x8mm CS (24)
(for use with Geode wheels)

5374X

Tires & wheels, assembled, glued (Gemini black chrome wheels,
Talon tires, foam inserts) (2) (use with 17mm splined wheel hubs
& nuts, part #5353X) (TSM rated)

5374

Tires & wheels, assembled, glued (Gemini chrome wheels, Talon
tires, foam inserts) (2) (also fits Maxx series)

5674

Tires & wheels, assembled, glued (Geode chrome wheels, Maxx tires
(6.3" outer diameter), foam inserts) (2) (use with 17mm splined wheel
hubs & nuts, part #5353X & beadlock-style sidewall protectors, part
#5665, 5666, 5667)

5672

Tires & wheels, assembled, glued (Geode chrome wheels,
paddle tires, foam inserts) (2) (use with 17mm splined wheel
hubs & nuts, part # 5353X) (TSM rated)

4973R

Tires & wheels, assembled, glued (Hurricane chrome wheels,
Maxx tires (6.3" outer diameter), foam inserts) (2) (fits Revo/Maxx
series)

5174A

Tires & wheels, assembled, glued (Split-Spoke satin-finish
wheels, Talon tires, foam inserts) (2) (fits Maxx w/sealed pivot
ball suspension & Revo)

4983A

Tires & wheels, assembled, glued (SS (Split Spoke) black
chrome wheels, Maxx tires (6.3" outer diameter), foam inserts)
(2) (fits Maxx/Revo series) (TSM rated)

5174

Tires & wheels, assembled, glued (SS (Split Spoke) chrome
wheels, Talon tires, foam inserts) (2) (fits Maxx/Revo series)

5174R

Tires & wheels, assembled, glued (SS (Split Spoke) chrome
wheels, Talon tires, foam inserts) (2) (use w/17mm splined wheel
hubs & nuts, part #5353X)

5375R

Tires & wheels, assembled, glued (white dished 3.8" wheels,
Response Pro tires, foam inserts) (2) (use with 17mm splined
wheel hubs and wheel nuts, part #5353X)

5670

Tires, Canyon AT 3.8" (2)/ foam inserts (2)

4973

Tires, Maxx 3.8" (6.3" outer diameter (160mm)) (2) (fits Revo/Maxx
series)

5171

Tires, Maxx Chevron 3.8" (2) (fits Revo/Maxx series)

5375

Tires, Response Pro 3.8" (soft-compound, narrow profile, short
knobby design)/ foam inserts (2)

5471

Tires, Response racing 3.8" (soft-compound, narrow profile,
short knobby design)/ foam inserts (2)

5470

Tires, SportTraxx racing 3.8" (soft compound, directional and
asymmetrical tread design)/ foam inserts (2)

5370

Tires, Talon 3.8" (2)/ foam inserts (2)

4954

Wheel hubs, hex (2)/ axle pins (2.5x12mm) (2)

4954R

Wheel hubs, hex (steel)

4954X

Wheel hubs, hex, 6061-T6 aluminum (blue) (4)/ axle pins
(2.5x10mm) (4)

5353X

Wheel hubs, splined, 17mm (blue-anodized) (4)/ wheel nuts, splined,
17mm (blue-anodized) (4)/ screw pins, 4x13mm (with threadlock) (4)

5353R

Wheel hubs, splined, 17mm (red-anodized) (4)/ wheel nuts,
splined, 17mm (red-anodized) (4)/ screw pins, 4x13mm (with
threadlock) (4)

5353

Wheel nuts, splined, 17mm (blue-anodized) (4)

5480X

Wheel wrench, splined, 17mm

5371

Wheels, dished 3.8" (white) (2) (use with 17mm splined wheel
hubs and wheel nuts, part #5353X)

5372A

Wheels, Gemini 3.8" (black chrome) (2)

5372X

Wheels, Gemini 3.8" (black chrome) (2) (use with 17mm splined
wheel hubs & nuts, part #5353X)

5372

Wheels, Gemini 3.8" (chrome) (2) (also fits Maxx series)

5671

Wheels, Geode 3.8" (chrome) (2) (use with 17mm splined wheel
hubs & nuts, part #5353X & beadlock-style sidewall protectors,
part #5665, 5666, 5667)

5373

Wheels, Hurricane 3.8" (chrome) (2) (also fits Maxx series)

5172A

Wheels, SS (split spoke) 3.8" (black chrome) (2) (use with 17mm
splined wheel hubs & nuts, part #5353X) (fits Revo/Maxx series)

5172X

Wheels, SS (split spoke) 3.8" (chrome) (2) (fits Revo/Maxx series)

5172R

Wheels, SS (split spoke) 3.8" (chrome) (2) (use with 17mm
splined wheel hubs & nuts, part #5353X) (fits Revo/Maxx series)

5172

Wheels, SS (split spoke) 3.8" (satin) (2) (fits Revo/Maxx series)

Transmission Components

5119

Ball bearings, blue rubber sealed (10x15x4mm) (2)

5116

Ball bearings, blue rubber sealed (5x11x4mm) (2)

5117

Ball bearings, blue rubber sealed (6x12x4mm) (2)

5388

Brake cam (1)/ sleeve (1)

5157

Cover plates and seals, forward only conversion (Revo)
(Optidrive blank-out plate, Optidrive sensor cover, shift fork
cover)

5414

Differential kit, center (Complete for Revo) (assembled with 100K
oil) Requires forward-only conversion (included)

5394X

Forward only conversion kit (eliminates reverse)

5383

Gear set, 2-speed close ratio (2nd speed gear 40T, 13T-16T input
gears, hardware)

Summary of Contents for 53097-3




























































Search results

Summary of Contents for 53097-3

Reviews:

Related manuals for 53097-3

Brands by name

Popular brands

Traxxas 53097-3, Owner'S Manual

Search results

Summary of Contents for 53097-3

Reviews:

Related manuals for 53097-3

Brands by name

Popular brands