7
N4T Pro Assembly Procedure:
1) Assemble dampers and springs per the instructions. Dampers should
be 65.5mm overall when assembled. Set aside. Bag A
A-1
Remove the shock parts from Bag A. Pour the contents of each individ-
ual bag into the corresponding compartment of the plastic parts box.
A-2
Insert a 6x.7mm clear spacer into the bottom of the aluminum shock
body.
A-3
Take a blue O-ring and push it into the bottom of the shock body.
A-4
Find one of the white 3x6x2.5mm white
PTFE
spacers and carefully remove any mold flashing
with a hobby knife. Insert the spacer into the
bottom of the shock body and press firmly so
that it compresses the blue O-ring.
Insert a blue O-ring and press it against the
white
PTFE
spacer.
A-5
Locate one of the 3x7.5x.8mm translucent seals and insert it into the
shock body. Press it down firmly until the groove on the inside edge of
the shock body is visible.
