6
Remove adjusting keys or switches before
turning the tool on.
A wrench or a key that is
left attached to a rotating part of the tool
may result in personal injury.
Do not overreach. Keep a proper footing
and balance at all times.
Proper footing
and balance enables better control of the
tool in unexpected situations.
Dress properly. Do not wear loose clothing
or jewelry. Keep your hair, clothing and
gloves away from moving parts.
Loose
clothes, jewelry or long hair can be caught
in moving parts.
■
Tool use and care
Do not force tool. Use the correct tool for
your application.
The correct tool will do
the job better and safer at the rate for
which it is designed.
Do not use tool if switch does not turn it on
or off.
Any tool that cannot be controlled
with the switch is dangerous and must be
repaired.
Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing the tool.
Such
preventive safety measures reduce the risk
of starting the tool accidentally.
Store idle tools out of reach of children and
do not allow persons unfamiliar with the
power tool or these instructions to operate
the power tool.
Tools are dangerous in the
hands of untrained users.
M a i n t a i n t o o l s w i t h c a r e .
P r o p e r l y
maintained tools are less likely to bind and
are easier to control.
Check for misalignment or binding of
moving parts, breakage of parts, and any
other condition that may affect the tools
operation. If damaged, have the tool
serviced before using.
Many accidents are
caused by poorly maintained tools.
Use the power tool, accessories and blades
etc., in accordance with these instructions
and in the manner intended for the
particular type of power tool, taking into
account the working conditions and the
work to be performed.
Use of the power
tool for operations different from those
intended could result in a hazardous
situation.
■
Service
Have your tool serviced by a qualified
r e p a i r p e r s o n u s i n g o n l y i d e n t i c a l
replacement parts.
This will ensure that the
safety of the power tool is maintained.
-WARNING- To reduce the risk of injury, user
must read instruction manual.
Symbols used in this manual
V……...volts
A……...amperes
Hz……..hertz
W……...watt
~………alternating current
n
0
…… .no load speed
min
-1
… .revolutions or reciprocation
per minute
…… .class II tool
